Page 1 of 1
E-Gauge
Posted: Sun Jan 08, 2023 1:52 pm
by ian.k
I am having difficulty loading an image to the E-Gauge as a new member.
I have got to the stage of uploading a file which seems to work but leaves a tiny
icon or image in the top left hand corner.
Whatever image I save (from Photo shop, Word, or scanned) I get the same result on upload.
I tried to scan at 800 dpi but my scanner has 600dpi or 1000dpi
If anyone has some ideas please let me know.
Many thanks.
Ian
Re: E-Gauge
Posted: Sun Jan 08, 2023 10:50 pm
by mindmapper
Ian,
I've checked the E-Gauge application & found to be functioning normally. On the two main points you've raised:
The resolution of the image must be 800ppi so as to match the resolution of the gauge. From your scanner I'd recommend scanning at 1000ppi, then re-scaling that at 80%. That would be better than taking a lower resolution scan at 600ppi and boosting it.
The gauge will only accept scans in either jpg or png formats. I've checked files in gif, tif, psp and psd formats which do not upload but leave the miniature icon upper left, as you've found. This suggests that the application is not detecting your files as jpg's. I've attached my reference test jpg file (measured at 4 3 3+ 7) which you may find useful to verify system functionality.
Regards,
Brian
Re: E-Gauge
Posted: Mon Jan 09, 2023 6:41 pm
by ian.k
Brian. Many thanks for the information and I hope that
will sort the problem.
Regards
Ian
Re: E-Gauge
Posted: Tue Oct 03, 2023 9:35 pm
by Galveston
mindmapper wrote: ↑Sun Jan 08, 2023 10:50 pm
Ian,
I've checked the E-Gauge application & found to be functioning normally. On the two main points you've raised:
The resolution of the image must be 800ppi so as to match the resolution of the gauge. From your scanner I'd recommend scanning at 1000ppi, then re-scaling that at 80%. That would be better than taking a lower resolution scan at 600ppi and boosting it.
The gauge will only accept scans in either jpg or png formats. I've checked files in gif, tif, psp and psd formats which do not upload but leave the miniature icon upper left, as you've found. This suggests that the application is not detecting your files as jpg's. I've attached my reference test jpg file (measured at 4 3 3+ 7) which you may find useful to verify system functionality.
Regards,
Brian
Brian -
I was hoping to ask a question on this post I came across. I was interested as to check my measuring skills - so I downloaded the image. But, the size comes across as not 800ppi. I then used download linked image and got the same size - see attached.
Is it suppose to be rescaled to get to 800ppi?
Tks. William
Re: E-Gauge
Posted: Wed Oct 04, 2023 8:44 am
by mindmapper
William,
I've downloaded the file from my earlier post and confirmed it is at 800ppi resolution. An independent check is to measure the gap between the tangents to the innermost arcs of the two reticulated networks. The average gap is 14.10mm for a large population of penny reds, corresponding to 444 pixels at 800ppi resolution. The downloaded image measured 443 pixels.
Regards,
Brian.
Re: E-Gauge
Posted: Wed Oct 04, 2023 1:27 pm
by Galveston
Thanks for the follow up. If you didn’t have to rescale, I shouldn’t have to either. So I guess ios is causing the issue as what I got is from a right-click download or open and save from browser. I got the same results both ways.
A problem for another time!